Customization: | Available |
---|---|
Bonding Function: | Instant Adhesive |
Morphology: | Solvent |
Still deciding? Get samples of US$ 0.1/Pieces
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Base
|
Ethyl 2-Cyanoacrylate
|
Appearance (uncured)
|
Transparent, colorless to yellowish colored liquid
|
Components
|
Single part- requires no mixing or heating
|
Specific Gravity @ 25ºC
|
1.1
|
Cure
|
Moisture
|
Flash point
|
See SDS
|
Application
|
Bonding
|
Viscosity, Brookfield @25ºC mPa.s (cP)
|
20-60 (ISO 3104/3105)
|
Service temperature range
|
-54~121ºC (-65~250ºF)
|
Full cure (hrs)
|
24
|
Bonding Identical Substrate
|
Fixture time, seconds
|
Mild steel
|
<10
|
Aluminum A5754
|
<10
|
ABS
|
<5
|
PVC(Polyvinyl chloride)
|
<5
|
PC(Polycarbonate)
|
10 to 15
|
Oak wood
|
15 to 20
|
Pine wood
|
20 to 30
|
Beech wood
|
<10
|
NBR(Nitrile-Butadiene Rubber)
|
10 to 15
|
Paper
|
<5
|
Directions:
1.Clean the surface, keep dry and get rid of the grease, rust. Otherwise, it would effect the solidifying speed and intensity. For metal material, remove the oil and rust firstly, then wash the surface with ethyl ester.
2.Use the cap to cut through the nozzle. Pile out the small quantity glue liquid, drop the glue onto the surface (only lubricate the surface), press and bond the material hardly.
3.The best time to use: at temperature 20~25ºC, relative humidity 50%.
Notic:
1.Take precaution against touching by the hands or eyes. If does, wash with dip in the water, do not peel the glue by force. If getting in the eyes, wash with water at once then see the doctor for further steps.
2.502 Super Glue has irritant odor. Keep the environment be ventilative and wear glasses to protect the eyes during long term usage.
3.Tighten the lid carefully after applying.
4.Please keep out of the touching by kid.